Thursday, May 26, 2011

Plasma cutter setting and evaluating tips

Plasma cutter is one of the finest welders used in the welding industry and it has all the specifications and things that are needed for a perfect welding. In this article, let us see how to set up and evaluate the plasma cutter. Know that any welders without proper set up and evaluation will not give you the perfect requirements you need and also without proper set up of any welder, you could not get a clean cut. Not only you won't get clean cut, but also it will damage your equipment. As plasma cutters become more affordable, more people use them for their metal-cutting needs. In the event you are thinking about a plasma cutter, you ought to evaluate your options based on several criteria. We will also see how to evaluate the plasma cutter in the article. So let us proceed now in to the setting up of plasma cutter.

Connect the air line jogging from an air compressor to the air regulator located on the back of the plasma cutter. Turn on the air compressor and Permit the compressor to build pressure and also set a piece of scrap metal on a non-combustible work surface. Place a fire extinguisher near your work area. Once you have done with the above procedures, try to secure the plasma cutter lead to the scrap metal or work surface. Now turn on the plasma cutter and set up its heat to the highest setting. Now grasp the plasma gun trigger and pull the plasma gun over the surface of the metal. Inspect the cut, if you notice any excessive dross cooled melted metal hanging from the cut, and then turn down the heat setting of the plasma cutter.

After being inspected, then adjust the cut so that there is no dross remains on the edges of the plasma cut. That's it now you can safely work with the plasma cutting machine. Now let us see how to evaluate the plasma cutter. The thicknesses of the metal you are going to cut is essential and always get the machines with higher amperage because machines with the higher amperage cuts faster and easily than the lower amperage. Test the cutting speeds of different plasma cutters with the same amperage to choose which machine works quickest through metals of the same thickness. You should examine the cuts to see how smooth the metal cuts and test the machine to determine the tightness of the arc and then try drawing a thick line over the metal to see how well it stay within the line.

Check whether the plasma torch cutter is comfort in your hand and don't forget to evaluate the plasma cutting machine with its duty cycle and look for a plasma cutter with different alternative starting methods. Read the welder manual to know its ratings, especially consumables ratings and your machine should be comfortable and portable. With all these steps, it is sure that you can have a good welding with the plasma cutting machine.

5 comments:

  1. Comment as: Sign out
    Subscribe by email

    ReplyDelete
  2. On August 17th, K-Stem, an institute that conducts a scholastic ability test in mathematics, announced the result of the survey asking 220 students to vote for the celebrities who seem to be good/bad at math.
    large eyeglass frames
    Linen Suit

    SBOBET
    play casino online

    air vents
    sauna

    Computer Rental Los Angeles
    tailor made suits

    Phytoplankton
    hotels in Coorg

    cctv installation
    cnc repair

    plus size wedding dresses
    bespoke suits

    the best replica watches
    click here

    silicone nipple covers
    romantic gift

    Gangtok
    how to last longer in bed for men

    For the category asking student to vote for celebrities who seem to be good at math, actress Kim Tae Hee ranked first with 43.4% of the votes, and Lee Seung Gi followed with 30.9% of the votes. According to the students, “Lee Seung Gi looks smart and intelligent” and “Kim Tae Hee went to Seoul National University, she is smart for real.”

    ReplyDelete
  3. SAI WELD INDIA Authorised Distributor of Thermal Dynamics Dealers & Importer of : Hypertherm, IGBT Inverter, Plasma / TIG / MIG / Arc Welding Machines Tungsten Electroddes and plasma cutters plasma consumable plasma torches etc.. for more information vist our site www.plasmaconsumable.in

    ReplyDelete
  4. Dear Webmaster,

    We received a notice from Google stating that they have levied a penalty on our website as they "detected unnatural links" redirecting to our website holidayiq.com.

    The only way we can remove this penalty and help Google reconsider putting our website back in their index is by removing these links and we need your help for the same. We request you to consider this request on high priority.

    http://winfredmann.blogspot.com/2011/04/plasma-cutter-working-procedure.html
    http://winfredmann.blogspot.com/2011/05/everlastwelders-benefits-of-using.html
    http://winfredmann.blogspot.com/2011/05/plasma-cutter-setting-and-evaluating.html

    We would again like to bring your notice that failure to remove these links would require us to file a "Disavow Links" report with Google. Once we submit this report to Google, they may "flag" your site as "spammy" or otherwise if anything is not in compliance with their guidelines. The last thing we want is to have another webmaster go through this grief!

    Your cooperation in this process would be deeply appreciated. We kindly request you to send us an acknowledgement of this mail along with a confirmation that these links have been removed.
    Thanks a lot for your help.

    If you want to reach out to us mail us on pradeep@holidayiq.com
    Regards,
    Webmaster
    holidayiq.com

    Regards
    Pradeep Ayyagari
    Ph: +91-8197849852

    ReplyDelete
  5. If you are a Maker space or individual lucky enough to own a Plasma Cutter, this electric protractor compass could be handy. check this link right here now

    ReplyDelete